Installing Wood Stove in Camping Van



  • @stellarsea If you've lived off grid them I am sure you have encountered oil burning stoves. Turning back the way back machine....

    The Mush Shack in Kasilof was twenty by fourteen. Stick and plywood, insulated and dry walled, plywood floor, iirc. Sported a loft. Kitchen area was just large enough that you could reach sink, cutting board, and three burner propane stove/oven with only a pivot foot. Step to the bathtub/shower that drained straight below before running down slope. Take your dump business out to the outhouse. Yep. Never had any plumbing problems. Other than knocking down the frozen poopsicle once or twice, depending on how full of shit you were...

    So, we heated this with an old fish camp oil burner from some decade of yore. Worked dandy. Had half dozen or so 55 gallon drums that I'd hand pump transfer/refill the one mounted horizontally on a stand as the feeder. About two-fifty to three hundred gallons got me thru the winter.

    More inland and a bit further north, a couple log cabins in native villages on the Yukon, swap in "Monitor" and/or "Toyo" stoves. Super efficient. And they've got thermostats and pilots, even. Shitting in tall cotton, we were.... Maybe now burning four to five hundred gallons per winter but these winters were also longer and colder.

    Anywho... cutting to the chase... those puppies are super efficient. I wonder if anyone has thought about use such as this? I know they did it back in the old days, pre LPG on sheep camp base trailers. Hmm..... 🤔

    P.S.; Uh, yeah, one of best part of mush shack living was I had trail access from the dog yard. Hike it up!!! 🐕 🐕 🐕 🐕 🐕 🐕



  • @DingusMcgee said in Installing Wood Stove in Camping Van:

    Stellar sea,

    The pos stove is still working fine. Perhaps you could change that word "how" of your final statement to 'when' and we would have clarification for the long rant? Oh, and also add 'don't'?

    You say," I know how to do a lot, from actual experience. the most important thing I [don't] know is [when] to admit I don't know something so I can learn."



  • Dingus. how is the rig working?



  • NickG. Good to hear from you!

    The rig got used last spring more than this fall. During summer I ocassionally go where 4wd & winch offer more ways out than the rig offers. I will start a new thread for additions to my Suburban. I see you are out & about

    Stellarsea's rant: he is stuck in the box -- "...from actual experience...". He seems to have missed the characterization of my posts that EXPERIMENTS tell you when a new idea can work -- when doing things outside the box you go against the grain of experience. His knowledge base is experience -- hence the clash.

    for the stove design I had a very stringent criteria -- no smoke in the cabin, which is a little different than what I imagine for the allowable smoke from a wood stove in an ad hoc fishing shack somewhere in Alaska. Smokers don't seem to be bothered by wood stove smoke. So does stellarsea light up?



  • I just used a Mr Buddy propane rig last fall in the sprinter. She will likely go on the road again next week? trying to stay salt free. Mr buddy will get another workout. The next thing is to see if i can refill the coleman canisters. I have the attachment but have never tried it. Isa has 20lb tank for her tiny house so i will steal some of her gas and see if it works .



  • NickG,

    Have supply tank above Coleman canister with supply tank upside down. You want the liquid to flow downhill through the thief line. Slightly open the schreader valve of the upright canister after opening main tank valve. Coleman canisters are filled only about 80%. Weight the empty canister before any filling and add this tare weight to what the can label says the net propane weight sold. If you get more product than the net propane sold, bleed off the excess via the shreader valve while you are not smoking. The schreader valve is not an automatic safety relief valve for too much pressure. The 20% empty is your safety volume.



  • If you do not open the schreader valve at all you usually get about 50% full but check to make sure you are less than 80%.



  • how can you tell??? the gizmo did not have any instructions.



  • BY EXPERIMENTS...I weighted the partially full canister and subtracted the tare weight(canister empty), then I divided that weight by the amount of contents in the can. I did this fullness ratio measurement for some dozen cans.
    IMG_0962.jpg

    You ought to have a scale for doing propane canister refilling. If you overfill 'em they may blow apart on a hot day.

    Maybe gloves to keep from freezing your fingers.

    IMG_0961.jpg

    Note: "Net Weight"



  • NickG says,"...no instructions..

    How do I know? I seen the likes of some stellarsea type minds attempting a propane "thieving operation" on a drilling rig circa 1968. They were not in the need of advise, for cavaliers they were.

    A home propane yard tank filling worker told me the details of how to do it safely -- long time ago -- before 1968.


Log in to reply